footswitch. Around back, it sports Send and
Return jacks for the passive effects loop,
a Slave output jack with a Level knob, two
speaker output jacks with a three-position
switch for setting 16-, 8-, and 4-ohm
impedance, and a standard AC connector.
The Slave output and Level control lets you
send a signal from the V- 40’s preamp to an
external power amp. You can also use the
effects loop’s Return jack to receive a slave
signal from another amp and run it through
the V- 40’s power section and speakers.
Though it wasn’t terribly difficult for me
to carry the amp short distances with one